Click to enlarge
HWT 160 SW–S
HWT 160 SW–S
Back to products
HWT 125 SW 2.0
HWT 125 SW 2.0

HWT 160 SW–E

This professional socket welder for setting branch-off fittings into the pipe wall is designed for all-purpose welding applications in PP and PEHD pipeline grids, to make branch‑offs of O.D. 20 – 63 mm*) from straight pipelines of O.D. 40 – 160 mm. It is the ideal choice for making lines branching off from fittings set into the pipeline sidewall in tight corners, but also for workshop applications meant for the serial manufacture by a reliable process of distribution/manifold lines, e. g., in geothermal systems.

The standard delivery includes the all-purpose pipe aligners for straight pipelines sized O.D. 40 – 160 mm, a bracket compatible with various cordless drills/screwdrivers Ø 43 mm driving the drilling head, and clamps for branch-offs in the saddle position sized up to O.D. 63 mm allowing precision alignment of cylindrical and octagonal fittings.

With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The chassis/carriage, without the RH and LH pipe‑aligning clamps, can be removed from its steel frame by simply loosening 4 mounting screws and can then be used in areas that are hard to reach or overhead.

Both the operation of the clamps for the straight pipe and the saddle fitting and the movement of the carriage for the latter are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the clamping chassis/carriage with a common power tool (cordless drill/screwdriver) as its drive.

A special mention deserve the heating element seat next to the chassis for clamping the saddle fitting, on which to place the heating element, and the two freely adjustable depth setpoints. The easy insertion and safe and swift removal of the heating element, including centering and an auto‑detaching step in the change‑over stage, bring a use as convenient as to be considered unique.

The insertion depth setpoints provide, on the one hand, consistent fusion depth and welding position and, on the other, shorter length of movements, thus faster change-over.

Categories: ,
Description

Technical Specs

HWT 160 SW–E, incl. repositioning pipe-aligning supports P/N 416-001-000
Operating Range straight pipeline O.D. 40 – 160 mm
branch-off fitting O.D. 20 – 63 mm*)
Materials PP, PEHD – others upon request
Heating Element Temperature Range 260°C | 500°F (200°C – 270°C | 392°F – 518°F)
Machine Dimensions (W × H × D) 360 × 650 × 610 mm
Machine Footprint (W × H × D)
w/ pipe supports		 2000 × 650 × 610 mm
Machine Weight 43 kg
Heating Element, electronically controlled
for sockets/spigots set onto or into the pipe saddle 20 – 63 mm
230 V/50 Hz; 1.0 kW		 P/N 416-074-000
Heating Element, electronically controlled
for sockets/spigots set onto or into the pipe saddle 63 – 90 mm
230 V/50 Hz; 1.5 kW		 P/N 416-074-001
Heating Element, electronically controlled
for sockets/spigots set onto or into the pipe saddle 20 – 63 mm
110 V/50 Hz; 0.9 kW		 P/N 416-074-002
Heating Element, electronically controlled
for sockets/spigots set onto or into the pipe saddle 63 – 90 mm
110 V/50 Hz; 1.4 kW		 P/N 416-074-003

 

*) other sizes upon request!

Related products

HWT 160 M / M+

Request a Brochure
Practical plastic butt-welding machines for jointing PE and PP pipes and fittings from O.D. 32 / 40 - 160 mm (1½" ‑ 6") with the heating element process, these tremendously mobile next-generation welding machines for on-site and in-shop applications are extremely versatile and especially suited for sanitary installations, drain piping, and pressure pipes for water conveyance as well as roof drains and chimney refurbishing systems. The machines are shiped with a sturdy stand, an electrical facing tool, heating element, and all reducer inserts; arrives plug-and-play, fully installed. Its clamps swivel by up to 15 degrees allowing segmented bend welding in sizes O.D. 32 / 40 - 160 mm (1½" ‑ 6").

EasyWeld Line

Request a Brochure
HÜRNER’s EasyWeld Line is your professional solution for butt-welding applications with PE, PP, PVDF1) and ECTFE1) pipes and fittings for all pressure ratios, from O.D. 20 through 110 mm (Tees O.D. 20 through 90 mm) and O.D. 50 through 180 mm. This system enables a unique way of handling that is simply unavailable anywhere else. For welding operations, it offers all the advantages of a mobile butt-welding system that is user-friendly and handy enough to be at home at any place, both on worksites and in workshops. The master clamps on the machine chassis are available, in the standard delivery, with horizontal and for the EasyWeld 110 T model also with vertical adjustability, which is particularly important for optimum results in Tee and segmented-bend welding applications. Its compact and lightweight design turns the machines into the optimum choice for overhead welding operations. This requires just the easy step of disassembling the machines from its base panel. The manufacture of fittings is possible thanks to the clamps on the chassis bilaterally swiveling by up to 15 deg. each (∢ 30 deg.). For tee jointing operations using the EasyWeld 110 T model, master clamps for the chassis are available that are set at a 45 deg. angle. The machines as a whole with its frame are mounted on a heavy-duty, powder‑coated base panel. Besides the standard delivery that includes a power facing tool, an outfit with a perfectly ergonomically designed manual facing tool is also available for the EasyWeld 110 V 2 model version. Both the power and the manual facing tools feature a reversible blade. The electronically controlled, PTFE-coated heating element features an integrated temperature control.

HÜRNER WhiteLine WeldControl 2.0

Request a Brochure
The handling of a WeldControl machine is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

HÜRNER LI Line, the 4-3-2 Machine Manual

Request a Brochure
The HÜRNER 4-3-2 Manual Hydraulic Series of butt-welding machines in the LI Line generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging. The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request). All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed.

HÜRNER WhiteLine SPG 2.0

Request a Brochure

HÜRNER’s welding data logger SPG 2.0 is made for easy and safe welding process control and report logging pursuant to the ISO 12176 standard.

The report generation system is specifically matched to HÜRNER butt-welding machines of the Manual Hydraulic series, but can of course be used with other systems effortlessly. The SPG 2.0 control software ships ex works with configurations for many third-party systems already installed. Therefore, the logger constitutes an upgrade for manually operated welding machines to achieve ISO-compliant recording, error handling, and welding process control. At every step in the welding process, the SPG 2.0 indicates the nominal and the actual values of the welding pressures and times, to walk the welder operating the hydraulic unit easily and correctly through the process. The unit thereby achieves the optimum welding process, in line with nationally applicable standards, as affecting both heating element temperatures and welding pressures and times.

Fluid Media Management System

Read more
This fluid media management system with a programmable control terminal and numerous functional modules ensures highest levels of occupational safety. One control terminal can be used to control several chemical storage cabinets and can be set up with various modules. In its standard model version, the system allows selecting the components needed for a planned system from the following modules: Identification module which makes sure that only authorized persons are given access to the hazardous substances in question. In active storage mode, the media are released only subsequent to proper identification. This is implemented in the form of the input of a programmable PIN. The identification can also be implemented, upon request, with transponder keys or biometrical readers. Air extraction monitoring module which monitors the air extractions and triggers alarms as appropriate. The air extraction has to be always operating on cabinets that can go into active storage mode. When it is, it must constantly verify that there is a flow of extracted air and must alert to the problem whenever the airflow should fail. The air extraction monitoring module is a way to comply with this requirement, i.e. when extraction airflow fails, an alarm is triggered and a signal is sent, e.g., to the control center. Dosing module which enables exact filling. The dosing module turns the release of very small quantities of fluid media from large storage units into a process that it just as easy as it is safe. The ideal add-on to a COMPLEX Line drum station, there is the possibility, besides dosing, to ensure continuous analyses of consumed and remaining quantities. Level sensing module which alerts to the risk of overflowing storage units. The level sensor drastically reduces any risk of bringing too much media into a storage unit, and the safety of both the user and the environment increases accordingly. The level sensing module is the part that completes the perfect solution, DISPOSAL Line. Combining the DISPOSAL Line and the COMPLEX Line brings you the ideal preconditions to ensure easy and safe media management. Door opening module which opens the door when switched on at the keypad. When the command was entered and confirmed, an audible signal alerts the user to the door being opened. The control by compressed air does not have any electrical or electronic component, which makes it perfectly suited for explosive atmospheres. Door locking module which enables pairing door locking and door unlocking to user identification, thereby restricting access to the fluid media to those persons authorized to use them. In other words, access control for personnel can extend to the access to the chemical storage cabinets.

HWT 125 SW 2.0

Request a Brochure

The machine is used to socket-weld PP, PVDF, PE pipes and fittings of O.D. 20 - 125 mm. Diamond-shaped clamps allow effortless positioning and securing of the fittings and pipes of all sizes. A specially designed fastening system is at the heart of the easy changing of the clamps depending on the job at hand.

The HWT 125 SW 2.0 features a unique reference setpoint pushbutton that enables convenient and professional adjustment of the component butt position. It goes without saying that fusion depth selectors and the corresponding spigots and sockets are available for common component types (DVS type A, DVS type B, ASTM in inches)

The system ships in a rugged, wooden transport and set‑up box (optional).

HWT 125 SW light

Read more

All-purpose socket welder for PP, PP-R, PVDF, PB, and PEHD fittings and pipelines in the range of dimensions from O.D. 20 - 125 mm, for professional overhead welding and operations in a confined space, yet also for standard workshop applications.

In its standard delivery, sockets and spigots size O.D. 63 - 125 mm are included, with O.D. 20 - 50 mm as an optional extra. With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The clamping chassis can be removed from its steel frame by simply loosening 4 mounting screws and can, therefore, be used in areas that are hard to reach or overhead.

Both clamping the pipe and the fitting and moving the machine carriages are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the carriages with a common power tool (drill / cordless screwdriver) as its drive. A special mention deserves the heating element seat of the clamping chassis, on which to place the heating element. The feature ensures easy insertion and safe removal of the heater, thereby providing reliable change-over management and convenient use that are unique in this category of welding systems.