Show sidebar

Air Extractor with Fan

Request a Brochure

This extractor provides easy airflow monitoring of chemical storage cabinets. The airflow monitoring unit with integrated fan ships preassembled to be installed immediately on top of the storage cabinet. The enclosure is made of silver pearl glimmer, powder-coated sheet steel

A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the defined minimum is detected. The air monitoring unit fan ships preassembled to be installed immediately on top of the storage cabinet. The alarm threshold for the airflow velocity is factory-set, but can be customized at the differential pressure meter/switch. The airflow sensor monitors the actual extraction velocity and the entire extraction system of the storage cabinet. Both the volumetric flow and the power supply are sensed by a microcontroller unit. When airflow velocity drops below the set threshold, visual and audible alarms are set off. The system ships with two potential-free (“dry”) contacts (24  V, 2 A) that can be used to send an alarm signal to the control center. An integrated battery cuts in in case of power supply failure, and the monitoring system and the display, including simple error messaging, can run on it for 4 hours. The product ships ready for plug-in.

EasyWeld Line

Request a Brochure
HÜRNER’s EasyWeld Line is your professional solution for butt-welding applications with PE, PP, PVDF1) and ECTFE1) pipes and fittings for all pressure ratios, from O.D. 20 through 110 mm (Tees O.D. 20 through 90 mm) and O.D. 50 through 180 mm. This system enables a unique way of handling that is simply unavailable anywhere else. For welding operations, it offers all the advantages of a mobile butt-welding system that is user-friendly and handy enough to be at home at any place, both on worksites and in workshops. The master clamps on the machine chassis are available, in the standard delivery, with horizontal and for the EasyWeld 110 T model also with vertical adjustability, which is particularly important for optimum results in Tee and segmented-bend welding applications. Its compact and lightweight design turns the machines into the optimum choice for overhead welding operations. This requires just the easy step of disassembling the machines from its base panel. The manufacture of fittings is possible thanks to the clamps on the chassis bilaterally swiveling by up to 15 deg. each (∢ 30 deg.). For tee jointing operations using the EasyWeld 110 T model, master clamps for the chassis are available that are set at a 45 deg. angle. The machines as a whole with its frame are mounted on a heavy-duty, powder‑coated base panel. Besides the standard delivery that includes a power facing tool, an outfit with a perfectly ergonomically designed manual facing tool is also available for the EasyWeld 110 V 2 model version. Both the power and the manual facing tools feature a reversible blade. The electronically controlled, PTFE-coated heating element features an integrated temperature control.

Electrofusion Customized Solutions

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience

Electrofusion Sanitary Applications

Request a Brochure
HÜRNER’s all-purpose electrofusion welders for heater-coil fittings offer expertly and convenient jointing with PE fittings for electrofusion sized 16 - 315 mm in wastewater and roof draining applications. Controlled by a microcontroller, the next-generation welder HÜRNER HST-S-315 2.0 enables temperature compensation by welding duration and features input and output voltage monitoring. It thereby is the convenient choice for power supply from a generator on a worksite, too. The welding process is monitored for its full duration, and relevant information is displayed on the seven-segment screen. The welder ships equipped with connection adapters A00, A01, A02, A03, A04, and A0P (Waviduo 200 - 315 mm). The delivery also includes a manual scraper for professional pipe preparation before welding. With its compact dimensions and the long power supply and welding cables, the welder has an extremely large working radius and can therefore be used for those pipelines that are hard to reach.

Electrofusion With Report Logging

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience.

The lighthouse products, HST 300 Pricon 2.0 and HST 300 Print+ 2.0, have an extremely intuitive data download menu enabling also transfer via Bluetooth, which allows downloading all welding and traceability data or a finely tuned selection of them, as an abstract or extended report in the PDF format, as a label tag printed with the optional printer, or as well in the DataWork format for processing on a PC.

Electrofusion Without Report Logging

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience.

Extraction Monitor without Fan

Request a Brochure

This monitoring unit provides easy airflow monitoring of chemical storage cabinets. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the defined minimum is detected. The air monitoring unit without fan ships preassembled to be installed immediately on top of the storage cabinet. The alarm threshold for the airflow velocity is factory-set, but can be customized at the differential pressure meter/switch. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. The airflow sensor monitors the actual extraction velocity and the entire extraction system of the storage cabinet.

Both the volumetric flow and the power supply are sensed by a microcontroller unit. When airflow velocity drops below the set threshold, visual and audible alarms are set off. The system ships with two potential-free (“dry”) contacts (24  V, 2 A) that can be used to send an alarm signal to the control center. An integrated battery cuts in in case of power supply failure, and the monitoring system and the display, including simple error messaging, can run on it for 4 hours. The product ships ready for plug-in.

Filter Units with Fan

Read more
This filter with fan provides positive extraction and monitoring of chemical storage cabinets, in the form of almost 100% decontamination of the extracted air by molecular adsorption filtering of harmful solvent vapors (hydrocarbons). The filter operation means optimum protection for the user. As a consequence, no additional air extraction outlet is needed, which, in turn, allows the filter unit to be operated immediately next to, or on top of, the storage cabinet. The decontaminated air is released into the ambient air, thereby not consuming any heated or air-conditioned air from the room. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the set threshold is detected. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. As an air extraction system, it as of today complies with “green lab” requirements, while offering you full flexibility of position. The multi-stage, grounded filtering system offers dual safety, being composed of: Activated carbon filter with twice as much activated carbon — for up to 100% decontamination Additionally a DIN EN 779-compliant particulate filter The filter alert appliance can be set at the differential pressure meter/switch. The filter elements themselves and the filter enclosure lid are monitored by ATEX-compliant micro-switches. The three-month check and replace interval of the activated carbon filter is verified by a check report the user has to confirm which is paired to a scheduler. The product ships ready for plug-in.

Fluid Media Management System

Read more
This fluid media management system with a programmable control terminal and numerous functional modules ensures highest levels of occupational safety. One control terminal can be used to control several chemical storage cabinets and can be set up with various modules. In its standard model version, the system allows selecting the components needed for a planned system from the following modules: Identification module which makes sure that only authorized persons are given access to the hazardous substances in question. In active storage mode, the media are released only subsequent to proper identification. This is implemented in the form of the input of a programmable PIN. The identification can also be implemented, upon request, with transponder keys or biometrical readers. Air extraction monitoring module which monitors the air extractions and triggers alarms as appropriate. The air extraction has to be always operating on cabinets that can go into active storage mode. When it is, it must constantly verify that there is a flow of extracted air and must alert to the problem whenever the airflow should fail. The air extraction monitoring module is a way to comply with this requirement, i.e. when extraction airflow fails, an alarm is triggered and a signal is sent, e.g., to the control center. Dosing module which enables exact filling. The dosing module turns the release of very small quantities of fluid media from large storage units into a process that it just as easy as it is safe. The ideal add-on to a COMPLEX Line drum station, there is the possibility, besides dosing, to ensure continuous analyses of consumed and remaining quantities. Level sensing module which alerts to the risk of overflowing storage units. The level sensor drastically reduces any risk of bringing too much media into a storage unit, and the safety of both the user and the environment increases accordingly. The level sensing module is the part that completes the perfect solution, DISPOSAL Line. Combining the DISPOSAL Line and the COMPLEX Line brings you the ideal preconditions to ensure easy and safe media management. Door opening module which opens the door when switched on at the keypad. When the command was entered and confirmed, an audible signal alerts the user to the door being opened. The control by compressed air does not have any electrical or electronic component, which makes it perfectly suited for explosive atmospheres. Door locking module which enables pairing door locking and door unlocking to user identification, thereby restricting access to the fluid media to those persons authorized to use them. In other words, access control for personnel can extend to the access to the chemical storage cabinets.

HÜRNER BSM 450

Request a Brochure
This band saw for cutting plastic pipes offers a working range from O.D. 50 - 450 mm. The machine has a steel pipework frame with a diamond-shaped pipe bed. A variably adjustable clamping system allows the manual securing of the pipe in the diamond bed. An angle gauge located on the side where the user stands enables any cutting angle from 0 deg. through 45 deg. An optional support panel can be mounted onto the diamond-shaped bed to enable you to cut Tees and crosspieces professionally.
Machine dimensions (H x W x D) 1800 x 1400 x 1200 mm Machine weight 190 kg Power supply 400 V, 50 Hz (3 ph. PE, N) Machine overall rated power 1250 W Operating range 50 - 450 mm Manufacturer Warranty 12 months Standards, quality WEEE Reg. No. DE 74849106, ISO 9001:2015

HÜRNER LI Line CNC ECO

Request a Brochure
The HÜRNER LI Line CNC ECO is a high-quality and durable, next-generation CN-controlled plastic pipe butt-welding machine that has been developed in compliance, as applicable, with the machinery directive 2006/42/EC as amended as well as the ISO standard 12176-1 and the DVS standard 2207-1. The design of the machine is such that with 12 basic machine chassis models, pipes from O.D. (63) 75 through 355 mm can be jointed The welding machines ship with a fully encased CNC hydraulic and control box of ingress protection IP 54 managing pressures of up to 220 bar. Both the anti-stick-coated heating element and the facing tool are hooked up along with the machine chassis to the hydraulic and control unit. No additional power distribution is needed.

HÜRNER LI Line, the 4-3-2 Machine Manual

Request a Brochure
The HÜRNER 4-3-2 Manual Hydraulic Series of butt-welding machines in the LI Line generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging. The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request). All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed.

HÜRNER LI Line, the 4-3-2 Machine WeldControl

Request a Brochure
The handling of the HÜRNER 4-3-2 machine WeldControl is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data.

HÜRNER WhiteLine CNC ECO 2.0

Request a Brochure
The HÜRNER CNC ECO 2.0 is a high-quality and durable, next-generation CN-controlled plastic pipe butt-welding machine that has been developed in compliance, as applicable, with the machinery directive 2006/42/EC as amended as well as the ISO standard 12176-1 and the DVS standard 2207-1. The design of the machine is such that with 12 basic machine chassis models, pipes from O.D. 40 through 1600 mm can be jointed The welding machines ship with a fully encased CNC hydraulic and control box of ingress protection IP 54 managing pressures of up to 220 bar. Both the anti-stick-coated heating element and the facing tool are hooked up along with the machine chassis to the hydraulic and control unit. No additional power distribution is needed. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

HÜRNER WhiteLine Manual Hydraulic

Request a Brochure
The Manual Hydraulic Series of butt-welding machines in the WhiteLine generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging. The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request). All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

HÜRNER WhiteLine SPG 2.0

Request a Brochure

HÜRNER’s welding data logger SPG 2.0 is made for easy and safe welding process control and report logging pursuant to the ISO 12176 standard.

The report generation system is specifically matched to HÜRNER butt-welding machines of the Manual Hydraulic series, but can of course be used with other systems effortlessly. The SPG 2.0 control software ships ex works with configurations for many third-party systems already installed. Therefore, the logger constitutes an upgrade for manually operated welding machines to achieve ISO-compliant recording, error handling, and welding process control. At every step in the welding process, the SPG 2.0 indicates the nominal and the actual values of the welding pressures and times, to walk the welder operating the hydraulic unit easily and correctly through the process. The unit thereby achieves the optimum welding process, in line with nationally applicable standards, as affecting both heating element temperatures and welding pressures and times.

HÜRNER WhiteLine WeldControl 2.0

Request a Brochure
The handling of a WeldControl machine is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

HWT 125 SW 2.0

Request a Brochure

The machine is used to socket-weld PP, PVDF, PE pipes and fittings of O.D. 20 - 125 mm. Diamond-shaped clamps allow effortless positioning and securing of the fittings and pipes of all sizes. A specially designed fastening system is at the heart of the easy changing of the clamps depending on the job at hand.

The HWT 125 SW 2.0 features a unique reference setpoint pushbutton that enables convenient and professional adjustment of the component butt position. It goes without saying that fusion depth selectors and the corresponding spigots and sockets are available for common component types (DVS type A, DVS type B, ASTM in inches)

The system ships in a rugged, wooden transport and set‑up box (optional).

HWT 125 SW light

Read more

All-purpose socket welder for PP, PP-R, PVDF, PB, and PEHD fittings and pipelines in the range of dimensions from O.D. 20 - 125 mm, for professional overhead welding and operations in a confined space, yet also for standard workshop applications.

In its standard delivery, sockets and spigots size O.D. 63 - 125 mm are included, with O.D. 20 - 50 mm as an optional extra. With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The clamping chassis can be removed from its steel frame by simply loosening 4 mounting screws and can, therefore, be used in areas that are hard to reach or overhead.

Both clamping the pipe and the fitting and moving the machine carriages are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the carriages with a common power tool (drill / cordless screwdriver) as its drive. A special mention deserves the heating element seat of the clamping chassis, on which to place the heating element. The feature ensures easy insertion and safe removal of the heater, thereby providing reliable change-over management and convenient use that are unique in this category of welding systems.

HWT 160 CS

Request a Brochure
HÜRNER's HWT 160 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allow making pipes, segmented bends and fittings in workable dimensions from O.D. 32 (20) through 160 mm | 1" (½") - 6". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

HWT 160 M / M+

Request a Brochure
Practical plastic butt-welding machines for jointing PE and PP pipes and fittings from O.D. 32 / 40 - 160 mm (1½" ‑ 6") with the heating element process, these tremendously mobile next-generation welding machines for on-site and in-shop applications are extremely versatile and especially suited for sanitary installations, drain piping, and pressure pipes for water conveyance as well as roof drains and chimney refurbishing systems. The machines are shiped with a sturdy stand, an electrical facing tool, heating element, and all reducer inserts; arrives plug-and-play, fully installed. Its clamps swivel by up to 15 degrees allowing segmented bend welding in sizes O.D. 32 / 40 - 160 mm (1½" ‑ 6").

HWT 160 SW–E

Request a Brochure
This professional socket welder for setting branch-off fittings into the pipe wall is designed for all-purpose welding applications in PP and PEHD pipeline grids, to make branch‑offs of O.D. 20 - 63 mm*) from straight pipelines of O.D. 40 - 160 mm. It is the ideal choice for making lines branching off from fittings set into the pipeline sidewall in tight corners, but also for workshop applications meant for the serial manufacture by a reliable process of distribution/manifold lines, e. g., in geothermal systems. The standard delivery includes the all-purpose pipe aligners for straight pipelines sized O.D. 40 - 160 mm, a bracket compatible with various cordless drills/screwdrivers Ø 43 mm driving the drilling head, and clamps for branch-offs in the saddle position sized up to O.D. 63 mm allowing precision alignment of cylindrical and octagonal fittings. With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The chassis/carriage, without the RH and LH pipe‑aligning clamps, can be removed from its steel frame by simply loosening 4 mounting screws and can then be used in areas that are hard to reach or overhead. Both the operation of the clamps for the straight pipe and the saddle fitting and the movement of the carriage for the latter are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the clamping chassis/carriage with a common power tool (cordless drill/screwdriver) as its drive. A special mention deserve the heating element seat next to the chassis for clamping the saddle fitting, on which to place the heating element, and the two freely adjustable depth setpoints. The easy insertion and safe and swift removal of the heating element, including centering and an auto‑detaching step in the change‑over stage, bring a use as convenient as to be considered unique. The insertion depth setpoints provide, on the one hand, consistent fusion depth and welding position and, on the other, shorter length of movements, thus faster change-over.

HWT 160 SW–S

Request a Brochure
This professional socket welder for saddle-style fittings is designed for all-purpose welding applications in PP, PP‑R, and PEHD pipeline grids, to make branch‑offs of O.D. 20 - 90 mm from straight pipelines of O.D. 40 - 160 mm. It is the ideal choice for making lines branching off from the pipe in a saddle position in tight corners, but also for workshop applications meant for the serial manufacture by a reliable process of distribution/manifold lines with the help of a movable right-hand and left-hand pipe clamp. The standard delivery includes the all-purpose pipe aligners for straight pipelines sized O.D. 40 - 160 mm, a bracket compatible with various cordless drills/screwdrivers Ø 43 mm driving the drilling head, and clamps for branch-offs in the saddle position sized up to O.D. 63 mm allowing precision alignment of cylindrical and octagonal fittings.

With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The chassis/carriage, without the RH and LH pipe‑aligning clamps, can be removed from its steel frame by simply loosening 4 mounting screws and can then be used in areas that are hard to reach or overhead.

Both the operation of the clamps for the straight pipe and the saddle fitting and the movement of the carriage for the latter are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the clamping chassis/carriage with a common power tool (cordless drill/screwdriver) as its drive.

A special mention deserve the heating element seat next to the chassis for clamping the saddle fitting, on which to place the heating element, and the two freely adjustable depth setpoints. The easy insertion and safe and swift removal of the heating element, including centering and an auto‑detaching step in the change‑over stage, bring a use as convenient as to be considered unique.

The insertion depth setpoints provide, on the one hand, consistent fusion depth and welding position and, on the other, shorter length of movements, thus faster change-over.

Special octagonal clamps for branch‑off fittings, of various wrench sizes, are also available.

HWT 250 MI

Request a Brochure
HÜRNER HWT 250 MI for manufacturing PE, PE 100 RC, PP, and PVDF1) pipes, segmented bends, and fittings. The design of the machine is such that pipes, segments O.D. 50 – 250 mm / 1½"– 8" with any SDR ratio up to SDR 11 can be processed. The system was developed under the machinery directive 2006/42/EC as amended, as far as applicable, and is set on a welded and bolted, totally heavy-duty support frame resistant to warping by design. Both the movable carriage of the system and the console carrying the heating element and the facing tool travel on precision-engineered, heavy load-bearing shafts and trapeze-shaped guides constructed with smoothly travelling runner blocks. Inserting the PTFE-coated heating element and the facing tool manually is as convenient as it is effortless. The swiveling master clamps on both sides can be rotated by up to 2 x 15 deg. (∢30 deg.) and also feature horizontal adjustability, to allow for compensating any misalignments. Heating element temperature control and facing tool operation are managed on the front panel. The practical wooden transport case serves both as a operating platform and as secure storage for the machine, the reducers, and the accessories.

HWT 400 Line

Request a Brochure
HÜRNER's HWT 400 Line is the end-to-end transformation of worksite technology into workshop systems. As a consequence, the HÜRNER HWT 400 mm workshop line, too, has systems of the versions CNC (HWT 400 CS and HWT 400 CS-S), WeldControl (HWT 400 WeldControl), and Manual Hydraulic (HWT 400 M). All systems have been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allow making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 90 through 400 mm (3 - 16" IPS). The HWT 400 CS-S  is equipped with additional master clamping assemblies designed for sidewall fusion onto the pipe saddle. The control software has been specifically adapted to allow one-sided preheating of the straight pipeline. The welding systems are set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriages and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. For the product versions CNC and WeldControl, it goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC and WeldControl systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

HWT 500 CS

Request a Brochure
HÜRNER's HWT 500 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 200 (160) through 500 mm | 6" - 20". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

HWT 630 CS

Request a Brochure
HÜRNER's HWT 630 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 160 through 630 (500) mm | 6" - 24 (20)". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Modular Protection System

Request a Brochure

Protect your chemical storage cabinet against unauthorized access, using the Modular Protection System (MPS). This system enables you to physically control the access to resources or hazardous substances in a state-of-the-art approach.

The identification ensures that only authorized persons are given access to the hazardous substances in question. This is implemented in the form of programmable PINs read from a transponder card by RFID technology. The identification can then be paired to the locking or the unlocking of the door of the cabinet. This means that the authorizations of personnel can extend to the storage cabinets as well.

The MPS is an important module to comply with increasingly tight requirements in terms of risk assessment as related to access control. In practical implementation, this may mean for you that work instructions providing for the safe and controlled use of hazardous substances can allow less complex routines, as, e.g., TRGS 526.

A functionality the MPS provides is the possibility to automatically close the door. This means that the cabinet takes care of door closing after the door was manually opened.