Click to enlarge
HWT 125 SW 2.0
HWT 125 SW 2.0
Back to products
HWT 160 CS
HWT 160 CS

HWT 125 SW light

All-purpose socket welder for PP, PP-R, PVDF, PB, and PEHD fittings and pipelines in the range of dimensions from O.D. 20 – 125 mm, for professional overhead welding and operations in a confined space, yet also for standard workshop applications.

In its standard delivery, sockets and spigots size O.D. 63 – 125 mm are included, with O.D. 20 – 50 mm as an optional extra.

With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC.
The clamping chassis can be removed from its steel frame by simply loosening 4 mounting screws and can, therefore, be used in areas that are hard to reach or overhead.

Both clamping the pipe and the fitting and moving the machine carriages are implemented as using ergonomically designed handwheels.
Additionally, the motion handwheel can be removed easily, to move the carriages with a common power tool (drill / cordless screwdriver) as its drive.

A special mention deserves the heating element seat of the clamping chassis, on which to place the heating element.
The feature ensures easy insertion and safe removal of the heater, thereby providing reliable change-over management and convenient use that are unique in this category of welding systems.

Categories: ,
Description

Technical Specs

 

Operating range O.D. 20 – 125 mm
Materials PP, PP-R, PVDF, PB, PEHD
Heating element (invariable temperature / electronically temperature controlled) 230 V (± 10%), 50/60 Hz, 1.5 kW
110 V (± 10%), 50/60 Hz, 1.5 kW
Dimensions of clamping chassis (W × H × D) 650 × 255 × 360 mm
Dimensions of machine (W × H × D) 650 × 425 × 360 mm
Weight of clamping chassis 10.9 kg
Weight of machine (w/o accessories) 17.2 kg
Heating spigot/socket dimensions per DVS 2208-1 type A / type B 63, 75, 90, 110, 125 mm (20, 25, 32, 40 + 50 mm optional)
Heating spigot/socket dimensions per ASTM F1056 (inches) – Upon Request! ½”, ¾”, 1″, 1¼”, 1½”, 2″, 3″, 4″ IPS
HWT 125 SW light P/N 411-000-…
w/ invariable temperature Type A (230 V) (63-125 mm) -000
w/ invariable temperature Type A (110 V) (63-125 mm) -004
w/ electronic temperature control Type A (230 V) (63-125 mm) -001
w/ electronic temperature control Type A (110 V) (63-125 mm) -005
w/ invariable temperature TypeB (230 V) (63-125 mm) -002
w/ invariable temperature Type B (110 V) (63-125 mm) -006
w/ electronic temperature control Type B (230 V) (63-125 mm) -003
w/ electronic temperature control Tpe B (110 V) (63-125 mm) -007

Related products

HWT 160 CS

Request a Brochure
HÜRNER's HWT 160 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allow making pipes, segmented bends and fittings in workable dimensions from O.D. 32 (20) through 160 mm | 1" (½") - 6". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

HWT 500 CS

Request a Brochure
HÜRNER's HWT 500 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 200 (160) through 500 mm | 6" - 20". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

HWT 125 SW 2.0

Request a Brochure

The machine is used to socket-weld PP, PVDF, PE pipes and fittings of O.D. 20 - 125 mm. Diamond-shaped clamps allow effortless positioning and securing of the fittings and pipes of all sizes. A specially designed fastening system is at the heart of the easy changing of the clamps depending on the job at hand.

The HWT 125 SW 2.0 features a unique reference setpoint pushbutton that enables convenient and professional adjustment of the component butt position. It goes without saying that fusion depth selectors and the corresponding spigots and sockets are available for common component types (DVS type A, DVS type B, ASTM in inches)

The system ships in a rugged, wooden transport and set‑up box (optional).

Extraction Monitor without Fan

Request a Brochure

This monitoring unit provides easy airflow monitoring of chemical storage cabinets. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the defined minimum is detected. The air monitoring unit without fan ships preassembled to be installed immediately on top of the storage cabinet. The alarm threshold for the airflow velocity is factory-set, but can be customized at the differential pressure meter/switch. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. The airflow sensor monitors the actual extraction velocity and the entire extraction system of the storage cabinet.

Both the volumetric flow and the power supply are sensed by a microcontroller unit. When airflow velocity drops below the set threshold, visual and audible alarms are set off. The system ships with two potential-free (“dry”) contacts (24  V, 2 A) that can be used to send an alarm signal to the control center. An integrated battery cuts in in case of power supply failure, and the monitoring system and the display, including simple error messaging, can run on it for 4 hours. The product ships ready for plug-in.

HWT 160 M / M+

Request a Brochure
Practical plastic butt-welding machines for jointing PE and PP pipes and fittings from O.D. 32 / 40 - 160 mm (1½" ‑ 6") with the heating element process, these tremendously mobile next-generation welding machines for on-site and in-shop applications are extremely versatile and especially suited for sanitary installations, drain piping, and pressure pipes for water conveyance as well as roof drains and chimney refurbishing systems. The machines are shiped with a sturdy stand, an electrical facing tool, heating element, and all reducer inserts; arrives plug-and-play, fully installed. Its clamps swivel by up to 15 degrees allowing segmented bend welding in sizes O.D. 32 / 40 - 160 mm (1½" ‑ 6").

HÜRNER WhiteLine WeldControl 2.0

Request a Brochure
The handling of a WeldControl machine is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

Modular Protection System

Request a Brochure

Protect your chemical storage cabinet against unauthorized access, using the Modular Protection System (MPS). This system enables you to physically control the access to resources or hazardous substances in a state-of-the-art approach.

The identification ensures that only authorized persons are given access to the hazardous substances in question. This is implemented in the form of programmable PINs read from a transponder card by RFID technology. The identification can then be paired to the locking or the unlocking of the door of the cabinet. This means that the authorizations of personnel can extend to the storage cabinets as well.

The MPS is an important module to comply with increasingly tight requirements in terms of risk assessment as related to access control. In practical implementation, this may mean for you that work instructions providing for the safe and controlled use of hazardous substances can allow less complex routines, as, e.g., TRGS 526.

A functionality the MPS provides is the possibility to automatically close the door. This means that the cabinet takes care of door closing after the door was manually opened.

Electrofusion Sanitary Applications

Request a Brochure
HÜRNER’s all-purpose electrofusion welders for heater-coil fittings offer expertly and convenient jointing with PE fittings for electrofusion sized 16 - 315 mm in wastewater and roof draining applications. Controlled by a microcontroller, the next-generation welder HÜRNER HST-S-315 2.0 enables temperature compensation by welding duration and features input and output voltage monitoring. It thereby is the convenient choice for power supply from a generator on a worksite, too. The welding process is monitored for its full duration, and relevant information is displayed on the seven-segment screen. The welder ships equipped with connection adapters A00, A01, A02, A03, A04, and A0P (Waviduo 200 - 315 mm). The delivery also includes a manual scraper for professional pipe preparation before welding. With its compact dimensions and the long power supply and welding cables, the welder has an extremely large working radius and can therefore be used for those pipelines that are hard to reach.