Click to enlarge
EasyWeld Line
EasyWeld Line
Back to products
HWT 250 MI
HWT 250 MI

HWT 160 M / M+

Practical plastic butt-welding machines for jointing PE and PP pipes and fittings from O.D. 32 / 40 – 160 mm (1½” ‑ 6″) with the heating element process, these tremendously mobile next-generation welding machines for on-site and in-shop applications are extremely versatile and especially suited for sanitary installations, drain piping, and pressure pipes for water conveyance as well as roof drains and chimney refurbishing systems.

The machines are shiped with a sturdy stand, an electrical facing tool, heating element, and all reducer inserts; arrives plug-and-play, fully installed.

Its clamps swivel by up to 15 degrees allowing segmented bend welding in sizes O.D. 32 / 40 – 160 mm (1½” ‑ 6″).

Categories: ,
Description

Technical Specs

 

Technical Specs P/N 200-260-…
HWT 160 M (230 V), 40 – 160 mm -600
HWT 160 M (110 V), 40 – 160 mm -700
HWT 160 M (230 V), 1½” – 6″ -850
HWT 160 M (110 V), 1½” – 6″ -851
HWT 160–M+ (230 V), 32 – 160 mm
w/ wide aluminum master clamps, incl. steel reducers		 -250
HWT 160–M+ (110 V), 32 – 160 mm
w/ wide aluminum master clamps, incl. steel reducers		 -350
HWT 160–M+ (230 V), 1½” – 6″
w/ wide aluminum master clamps, incl. steel reducers		 -550
HWT 160–M+ (110 V), 1½” – 6″
w/ wide aluminum master clamps, incl. steel reducers		 -950
Operating range O.D. 32 / 40 – 160 mm
Materials PE, PP, other thermoplastics
Input voltage 230 V, 50/60 Hz or 110 V, 50 Hz
Rated power 1.8 kW
Transverse table travel 130 mm
Overall dimensions of machine (W x H x D) 730 x 580 x 430 mm
Weight of basic chassis 33 kg
Weight of machine incl. of all reducers in case 62 kg
Overall dimensions incl. stand (W x H x D) 730 x 1200 x 550 mm
Reducers (32) 40, 50, 63, 75, 90, 110, 125, 140 mm | 1½”, 2″, 3″, 4″, 5″, 6″
Accessories Steel transport box for reducers, user’s manual, tools

Related products

Extraction Monitor without Fan

Request a Brochure

This monitoring unit provides easy airflow monitoring of chemical storage cabinets. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the defined minimum is detected. The air monitoring unit without fan ships preassembled to be installed immediately on top of the storage cabinet. The alarm threshold for the airflow velocity is factory-set, but can be customized at the differential pressure meter/switch. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. The airflow sensor monitors the actual extraction velocity and the entire extraction system of the storage cabinet.

Both the volumetric flow and the power supply are sensed by a microcontroller unit. When airflow velocity drops below the set threshold, visual and audible alarms are set off. The system ships with two potential-free (“dry”) contacts (24  V, 2 A) that can be used to send an alarm signal to the control center. An integrated battery cuts in in case of power supply failure, and the monitoring system and the display, including simple error messaging, can run on it for 4 hours. The product ships ready for plug-in.

HWT 160 SW–S

Request a Brochure
This professional socket welder for saddle-style fittings is designed for all-purpose welding applications in PP, PP‑R, and PEHD pipeline grids, to make branch‑offs of O.D. 20 - 90 mm from straight pipelines of O.D. 40 - 160 mm. It is the ideal choice for making lines branching off from the pipe in a saddle position in tight corners, but also for workshop applications meant for the serial manufacture by a reliable process of distribution/manifold lines with the help of a movable right-hand and left-hand pipe clamp. The standard delivery includes the all-purpose pipe aligners for straight pipelines sized O.D. 40 - 160 mm, a bracket compatible with various cordless drills/screwdrivers Ø 43 mm driving the drilling head, and clamps for branch-offs in the saddle position sized up to O.D. 63 mm allowing precision alignment of cylindrical and octagonal fittings.

With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The chassis/carriage, without the RH and LH pipe‑aligning clamps, can be removed from its steel frame by simply loosening 4 mounting screws and can then be used in areas that are hard to reach or overhead.

Both the operation of the clamps for the straight pipe and the saddle fitting and the movement of the carriage for the latter are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the clamping chassis/carriage with a common power tool (cordless drill/screwdriver) as its drive.

A special mention deserve the heating element seat next to the chassis for clamping the saddle fitting, on which to place the heating element, and the two freely adjustable depth setpoints. The easy insertion and safe and swift removal of the heating element, including centering and an auto‑detaching step in the change‑over stage, bring a use as convenient as to be considered unique.

The insertion depth setpoints provide, on the one hand, consistent fusion depth and welding position and, on the other, shorter length of movements, thus faster change-over.

Special octagonal clamps for branch‑off fittings, of various wrench sizes, are also available.

HÜRNER LI Line, the 4-3-2 Machine Manual

Request a Brochure
The HÜRNER 4-3-2 Manual Hydraulic Series of butt-welding machines in the LI Line generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging. The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request). All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed.

HÜRNER LI Line, the 4-3-2 Machine WeldControl

Request a Brochure
The handling of the HÜRNER 4-3-2 machine WeldControl is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data.

Electrofusion Without Report Logging

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience.

HWT 125 SW 2.0

Request a Brochure

The machine is used to socket-weld PP, PVDF, PE pipes and fittings of O.D. 20 - 125 mm. Diamond-shaped clamps allow effortless positioning and securing of the fittings and pipes of all sizes. A specially designed fastening system is at the heart of the easy changing of the clamps depending on the job at hand.

The HWT 125 SW 2.0 features a unique reference setpoint pushbutton that enables convenient and professional adjustment of the component butt position. It goes without saying that fusion depth selectors and the corresponding spigots and sockets are available for common component types (DVS type A, DVS type B, ASTM in inches)

The system ships in a rugged, wooden transport and set‑up box (optional).

Electrofusion Sanitary Applications

Request a Brochure
HÜRNER’s all-purpose electrofusion welders for heater-coil fittings offer expertly and convenient jointing with PE fittings for electrofusion sized 16 - 315 mm in wastewater and roof draining applications. Controlled by a microcontroller, the next-generation welder HÜRNER HST-S-315 2.0 enables temperature compensation by welding duration and features input and output voltage monitoring. It thereby is the convenient choice for power supply from a generator on a worksite, too. The welding process is monitored for its full duration, and relevant information is displayed on the seven-segment screen. The welder ships equipped with connection adapters A00, A01, A02, A03, A04, and A0P (Waviduo 200 - 315 mm). The delivery also includes a manual scraper for professional pipe preparation before welding. With its compact dimensions and the long power supply and welding cables, the welder has an extremely large working radius and can therefore be used for those pipelines that are hard to reach.

HÜRNER WhiteLine WeldControl 2.0

Request a Brochure
The handling of a WeldControl machine is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!