HÜRNER LI Line, the 4-3-2 Machine Manual

The HÜRNER 4-3-2 Manual Hydraulic Series of butt-welding machines in the LI Line generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging.

The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request).

All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed.

Welding monitoring system
Heating element temperature

Display screen
7-segment numerical characters, character height 10 mm

Hydraulic unit

Only one supply needed, all connections and an additional power socket on the back of the enclosure
Digital heating element temperature control, settable from the hydraulic unit
Hydraulic unit in encased, rugged steel enclosure with a weight of as little as 19.5 kg (up to O.D. 355 mm)
Max. pressure up to O.D. 355 mm, 130 bar
Welding pressures displayed on precise, maintenance-free manometer gauge

Hydraulic unit easily upgraded with SPG welding report logger:

Pressure sensor 160 bar set into hydraulic system
Dedicated support set onto the corner of the hydraulic unit for the data logger, made for harsh worksite environments
Pressure and temperature connectors directly plugged into the hydraulic system via short lines
Power supply to the data logger possible from the PE-wired power socket on the back of the hydraulic unit

Technical Specs

Dimension	250 mm	315 mm	355 mm¹⁾
P/N 200-731-…	-251	-315	-355
Operating range, O.D.	(63) 75 – 250 mm	90 – 315 mm	90 – 355 mm
Power supply	230 V	230 V	230 V
Frequency	50 Hz	50 Hz	50 Hz
Rated power	3.65 kW	4.65 kW	5.40 kW
Overall weight incl. of all components	89 kg	119 kg	142 kg
Weight basic machine	19 – 41 kg	40 – 66 kg	50 – 95 kg
Reducer inserts	(63) 75 – 225	90 – 280	90 – 315

Click to enlarge

Back to products

Categories: Butt Welding, HÜRNER

Description

Dimension	250 mm	315 mm	355 mm¹⁾
P/N 200-731-…	-251	-315	-355
Operating range, O.D.	(63) 75 – 250 mm	90 – 315 mm	90 – 355 mm
Power supply	230 V	230 V	230 V
Frequency	50 Hz	50 Hz	50 Hz
Rated power	3.65 kW	4.65 kW	5.40 kW
Overall weight incl. of all components	89 kg	119 kg	142 kg
Weight basic machine	19 – 41 kg	40 – 66 kg	50 – 95 kg
Reducer inserts	(63) 75 – 225	90 – 280	90 – 315

Related products

Filter Units with Fan

This filter with fan provides positive extraction and monitoring of chemical storage cabinets, in the form of almost 100% decontamination of the extracted air by molecular adsorption filtering of harmful solvent vapors (hydrocarbons). The filter operation means optimum protection for the user. As a consequence, no additional air extraction outlet is needed, which, in turn, allows the filter unit to be operated immediately next to, or on top of, the storage cabinet. The decontaminated air is released into the ambient air, thereby not consuming any heated or air-conditioned air from the room. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the set threshold is detected. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. As an air extraction system, it as of today complies with “green lab” requirements, while offering you full flexibility of position. The multi-stage, grounded filtering system offers dual safety, being composed of: Activated carbon filter with twice as much activated carbon — for up to 100% decontamination Additionally a DIN EN 779-compliant particulate filter The filter alert appliance can be set at the differential pressure meter/switch. The filter elements themselves and the filter enclosure lid are monitored by ATEX-compliant micro-switches. The three-month check and replace interval of the activated carbon filter is verified by a check report the user has to confirm which is paired to a scheduler. The product ships ready for plug-in.

HWT 125 SW light

All-purpose socket welder for PP, PP-R, PVDF, PB, and PEHD fittings and pipelines in the range of dimensions from O.D. 20 - 125 mm, for professional overhead welding and operations in a confined space, yet also for standard workshop applications.

In its standard delivery, sockets and spigots size O.D. 63 - 125 mm are included, with O.D. 20 - 50 mm as an optional extra. With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The clamping chassis can be removed from its steel frame by simply loosening 4 mounting screws and can, therefore, be used in areas that are hard to reach or overhead.

Both clamping the pipe and the fitting and moving the machine carriages are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the carriages with a common power tool (drill / cordless screwdriver) as its drive. A special mention deserves the heating element seat of the clamping chassis, on which to place the heating element. The feature ensures easy insertion and safe removal of the heater, thereby providing reliable change-over management and convenient use that are unique in this category of welding systems.

Extraction Monitor without Fan

Request a Brochure

This monitoring unit provides easy airflow monitoring of chemical storage cabinets. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the defined minimum is detected. The air monitoring unit without fan ships preassembled to be installed immediately on top of the storage cabinet. The alarm threshold for the airflow velocity is factory-set, but can be customized at the differential pressure meter/switch. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. The airflow sensor monitors the actual extraction velocity and the entire extraction system of the storage cabinet.

Both the volumetric flow and the power supply are sensed by a microcontroller unit. When airflow velocity drops below the set threshold, visual and audible alarms are set off. The system ships with two potential-free (“dry”) contacts (24 V, 2 A) that can be used to send an alarm signal to the control center. An integrated battery cuts in in case of power supply failure, and the monitoring system and the display, including simple error messaging, can run on it for 4 hours. The product ships ready for plug-in.

HWT 630 CS

HÜRNER's HWT 630 CS servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 160 through 630 (500) mm | 6" - 24 (20)". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Electrofusion Customized Solutions

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience

HÜRNER WhiteLine Manual Hydraulic

The Manual Hydraulic Series of butt-welding machines in the WhiteLine generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging. The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request). All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3^rd clamp for clamping fittings with a short connecting stub.*⁾ *⁾Retrofit kit for converting existing systems to industry version available upon request!

HÜRNER WhiteLine CNC ECO 2.0

The HÜRNER CNC ECO 2.0 is a high-quality and durable, next-generation CN-controlled plastic pipe butt-welding machine that has been developed in compliance, as applicable, with the machinery directive 2006/42/EC as amended as well as the ISO standard 12176-1 and the DVS standard 2207-1. The design of the machine is such that with 12 basic machine chassis models, pipes from O.D. 40 through 1600 mm can be jointed The welding machines ship with a fully encased CNC hydraulic and control box of ingress protection IP 54 managing pressures of up to 220 bar. Both the anti-stick-coated heating element and the facing tool are hooked up along with the machine chassis to the hydraulic and control unit. No additional power distribution is needed. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3^rd clamp for clamping fittings with a short connecting stub.*⁾ *⁾Retrofit kit for converting existing systems to industry version available upon request!

EasyWeld Line

HÜRNER’s EasyWeld Line is your professional solution for butt-welding applications with PE, PP, PVDF¹⁾ and ECTFE¹⁾ pipes and fittings for all pressure ratios, from O.D. 20 through 110 mm (Tees O.D. 20 through 90 mm) and O.D. 50 through 180 mm. This system enables a unique way of handling that is simply unavailable anywhere else. For welding operations, it offers all the advantages of a mobile butt-welding system that is user-friendly and handy enough to be at home at any place, both on worksites and in workshops. The master clamps on the machine chassis are available, in the standard delivery, with horizontal and for the EasyWeld 110 T model also with vertical adjustability, which is particularly important for optimum results in Tee and segmented-bend welding applications. Its compact and lightweight design turns the machines into the optimum choice for overhead welding operations. This requires just the easy step of disassembling the machines from its base panel. The manufacture of fittings is possible thanks to the clamps on the chassis bilaterally swiveling by up to 15 deg. each (∢ 30 deg.). For tee jointing operations using the EasyWeld 110 T model, master clamps for the chassis are available that are set at a 45 deg. angle. The machines as a whole with its frame are mounted on a heavy-duty, powder‑coated base panel. Besides the standard delivery that includes a power facing tool, an outfit with a perfectly ergonomically designed manual facing tool is also available for the EasyWeld 110 V 2 model version. Both the power and the manual facing tools feature a reversible blade. The electronically controlled, PTFE-coated heating element features an integrated temperature control.