Click to enlarge
HWT 400 Line
HWT 400 Line
Back to products
HWT 630 CS
HWT 630 CS

HWT 500 CS

HÜRNER’s HWT 500 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems.

The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 200 (160) through 500 mm | 6″ – 20″.

The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks.

It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Categories: ,
Description

Technical Specs

Technical specs HWT 500 CS
P/N with narrow
aluminum clamping jaws		 409-000-000
409-000-001 (IPS)
Machine dimensions (W × H × D) approx. 1500 × 2500 × 1700 mm
Machine weight 1490 kg
Power supply 400 V, 50 Hz, (3 ph., PE)
Machine overall rated power 13.6 kW
Heating element rated power 8 kW
Facing tool rated power 2.2 kW
Servo motor rated power 3.4 kW
Compressed air min. 6 bar, max. 14 bar (2:4:2)
Temperature range 5 °C – 40 °C
Heating element temperature max. 290 °C
Operating range Segments: 160 – 500 mm
Tees, Crosspieces, Y-pieces: 160 – 500 mm1)
Automatic data logging 10,000 welding operations
Data download USB ports (USB A) for USB stick and label tag printer
Standards, approvals, quality Machinery directive 2006/42/EC, DVS 2207-1, WEEE Reg. No. DE 74849106, ISO 9001:2015

 

1)           requires optional clamps

Related products

Electrofusion With Report Logging

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience.

The lighthouse products, HST 300 Pricon 2.0 and HST 300 Print+ 2.0, have an extremely intuitive data download menu enabling also transfer via Bluetooth, which allows downloading all welding and traceability data or a finely tuned selection of them, as an abstract or extended report in the PDF format, as a label tag printed with the optional printer, or as well in the DataWork format for processing on a PC.

Fluid Media Management System

Read more
This fluid media management system with a programmable control terminal and numerous functional modules ensures highest levels of occupational safety. One control terminal can be used to control several chemical storage cabinets and can be set up with various modules. In its standard model version, the system allows selecting the components needed for a planned system from the following modules: Identification module which makes sure that only authorized persons are given access to the hazardous substances in question. In active storage mode, the media are released only subsequent to proper identification. This is implemented in the form of the input of a programmable PIN. The identification can also be implemented, upon request, with transponder keys or biometrical readers. Air extraction monitoring module which monitors the air extractions and triggers alarms as appropriate. The air extraction has to be always operating on cabinets that can go into active storage mode. When it is, it must constantly verify that there is a flow of extracted air and must alert to the problem whenever the airflow should fail. The air extraction monitoring module is a way to comply with this requirement, i.e. when extraction airflow fails, an alarm is triggered and a signal is sent, e.g., to the control center. Dosing module which enables exact filling. The dosing module turns the release of very small quantities of fluid media from large storage units into a process that it just as easy as it is safe. The ideal add-on to a COMPLEX Line drum station, there is the possibility, besides dosing, to ensure continuous analyses of consumed and remaining quantities. Level sensing module which alerts to the risk of overflowing storage units. The level sensor drastically reduces any risk of bringing too much media into a storage unit, and the safety of both the user and the environment increases accordingly. The level sensing module is the part that completes the perfect solution, DISPOSAL Line. Combining the DISPOSAL Line and the COMPLEX Line brings you the ideal preconditions to ensure easy and safe media management. Door opening module which opens the door when switched on at the keypad. When the command was entered and confirmed, an audible signal alerts the user to the door being opened. The control by compressed air does not have any electrical or electronic component, which makes it perfectly suited for explosive atmospheres. Door locking module which enables pairing door locking and door unlocking to user identification, thereby restricting access to the fluid media to those persons authorized to use them. In other words, access control for personnel can extend to the access to the chemical storage cabinets.

HWT 630 CS

Request a Brochure
HÜRNER's HWT 630 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 160 through 630 (500) mm | 6" - 24 (20)". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

HÜRNER LI Line CNC ECO

Request a Brochure
The HÜRNER LI Line CNC ECO is a high-quality and durable, next-generation CN-controlled plastic pipe butt-welding machine that has been developed in compliance, as applicable, with the machinery directive 2006/42/EC as amended as well as the ISO standard 12176-1 and the DVS standard 2207-1. The design of the machine is such that with 12 basic machine chassis models, pipes from O.D. (63) 75 through 355 mm can be jointed The welding machines ship with a fully encased CNC hydraulic and control box of ingress protection IP 54 managing pressures of up to 220 bar. Both the anti-stick-coated heating element and the facing tool are hooked up along with the machine chassis to the hydraulic and control unit. No additional power distribution is needed.

HWT 250 MI

Request a Brochure
HÜRNER HWT 250 MI for manufacturing PE, PE 100 RC, PP, and PVDF1) pipes, segmented bends, and fittings. The design of the machine is such that pipes, segments O.D. 50 – 250 mm / 1½"– 8" with any SDR ratio up to SDR 11 can be processed. The system was developed under the machinery directive 2006/42/EC as amended, as far as applicable, and is set on a welded and bolted, totally heavy-duty support frame resistant to warping by design. Both the movable carriage of the system and the console carrying the heating element and the facing tool travel on precision-engineered, heavy load-bearing shafts and trapeze-shaped guides constructed with smoothly travelling runner blocks. Inserting the PTFE-coated heating element and the facing tool manually is as convenient as it is effortless. The swiveling master clamps on both sides can be rotated by up to 2 x 15 deg. (∢30 deg.) and also feature horizontal adjustability, to allow for compensating any misalignments. Heating element temperature control and facing tool operation are managed on the front panel. The practical wooden transport case serves both as a operating platform and as secure storage for the machine, the reducers, and the accessories.

HÜRNER WhiteLine Manual Hydraulic

Request a Brochure
The Manual Hydraulic Series of butt-welding machines in the WhiteLine generation makes a statement by its superior manufacturing quality and its scalability in the form of an easy upgrade to a data logging-enabled machine with the installation of an SPG 2.0 data logger for welding report logging. The machine ships with a hydraulic unit that features, as a unique characteristic, a totally integrated enclosure that also is a splash and dirt shield for all components on the inside. The front panel controls, too, are included in the ingress protection according to the IP 54 rating (where IP 64 is possible upon request). All connections, including an additional power socket free to use for the operator’s convenience, are located at the back of the controller. Both the facing tool and the heating element are also connected at the back panel of the hydraulic controller. Therefore, no additional power distribution unit is needed. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

HWT 160 SW–E

Request a Brochure
This professional socket welder for setting branch-off fittings into the pipe wall is designed for all-purpose welding applications in PP and PEHD pipeline grids, to make branch‑offs of O.D. 20 - 63 mm*) from straight pipelines of O.D. 40 - 160 mm. It is the ideal choice for making lines branching off from fittings set into the pipeline sidewall in tight corners, but also for workshop applications meant for the serial manufacture by a reliable process of distribution/manifold lines, e. g., in geothermal systems. The standard delivery includes the all-purpose pipe aligners for straight pipelines sized O.D. 40 - 160 mm, a bracket compatible with various cordless drills/screwdrivers Ø 43 mm driving the drilling head, and clamps for branch-offs in the saddle position sized up to O.D. 63 mm allowing precision alignment of cylindrical and octagonal fittings. With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The chassis/carriage, without the RH and LH pipe‑aligning clamps, can be removed from its steel frame by simply loosening 4 mounting screws and can then be used in areas that are hard to reach or overhead. Both the operation of the clamps for the straight pipe and the saddle fitting and the movement of the carriage for the latter are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the clamping chassis/carriage with a common power tool (cordless drill/screwdriver) as its drive. A special mention deserve the heating element seat next to the chassis for clamping the saddle fitting, on which to place the heating element, and the two freely adjustable depth setpoints. The easy insertion and safe and swift removal of the heating element, including centering and an auto‑detaching step in the change‑over stage, bring a use as convenient as to be considered unique. The insertion depth setpoints provide, on the one hand, consistent fusion depth and welding position and, on the other, shorter length of movements, thus faster change-over.

Electrofusion Sanitary Applications

Request a Brochure
HÜRNER’s all-purpose electrofusion welders for heater-coil fittings offer expertly and convenient jointing with PE fittings for electrofusion sized 16 - 315 mm in wastewater and roof draining applications. Controlled by a microcontroller, the next-generation welder HÜRNER HST-S-315 2.0 enables temperature compensation by welding duration and features input and output voltage monitoring. It thereby is the convenient choice for power supply from a generator on a worksite, too. The welding process is monitored for its full duration, and relevant information is displayed on the seven-segment screen. The welder ships equipped with connection adapters A00, A01, A02, A03, A04, and A0P (Waviduo 200 - 315 mm). The delivery also includes a manual scraper for professional pipe preparation before welding. With its compact dimensions and the long power supply and welding cables, the welder has an extremely large working radius and can therefore be used for those pipelines that are hard to reach.