This filter with fan provides positive extraction and monitoring of chemical storage cabinets, in the form of almost 100% decontamination of the extracted air by molecular adsorption filtering of harmful solvent vapors (hydrocarbons). The filter operation means optimum protection for the user. As a consequence, no additional air extraction outlet is needed, which, in turn, allows the filter unit to be operated immediately next to, or on top of, the storage cabinet. The decontaminated air is released into the ambient air, thereby not consuming any heated or air-conditioned air from the room. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the set threshold is detected. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. As an air extraction system, it as of today complies with “green lab” requirements, while offering you full flexibility of position. The multi-stage, grounded filtering system offers dual safety, being composed of:
Activated carbon filter with twice as much activated carbon — for up to 100% decontamination
Additionally a DIN EN 779-compliant particulate filter
The filter alert appliance can be set at the differential pressure meter/switch. The filter elements themselves and the filter enclosure lid are monitored by ATEX-compliant micro-switches. The three-month check and replace interval of the activated carbon filter is verified by a check report the user has to confirm which is paired to a scheduler. The product ships ready for plug-in.
| P/N 500-100… | -109 |
| Dimensions | 530 x 275 x 420 mm |
| Rubber sleeve | 75 mm |
| Volumetric flow | 0 – 37 m³/h |
| Rounds per minute | 0 – 2820 1/min |
| Power supply | 230 V, 50 Hz |
| Current input | 0,1 A |
| Sound pressure level LpA | 34 – 56 db (A) |
| Approval | DIN EN 14986-compliant fan |
| ATEX-compliant under Dir. 2014/34/EU and Type Certificate issued by TÜV Süd continued control pursuant to DIN EN 1946-7 complies with requirements in TRGS 510 Appx 3, BGV A 1, BGR 132 and TRBS 2153. |
|
The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.
Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.
Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience.
