Click to enlarge
EasyWeld Line
EasyWeld Line
Back to products
HWT 250 MI
HWT 250 MI

HWT 160 M / M+

Practical plastic butt-welding machines for jointing PE and PP pipes and fittings from O.D. 32 / 40 – 160 mm (1½” ‑ 6″) with the heating element process, these tremendously mobile next-generation welding machines for on-site and in-shop applications are extremely versatile and especially suited for sanitary installations, drain piping, and pressure pipes for water conveyance as well as roof drains and chimney refurbishing systems.

The machines are shiped with a sturdy stand, an electrical facing tool, heating element, and all reducer inserts; arrives plug-and-play, fully installed.

Its clamps swivel by up to 15 degrees allowing segmented bend welding in sizes O.D. 32 / 40 – 160 mm (1½” ‑ 6″).

Categories: ,
Description

Technical Specs

 

Technical Specs P/N 200-260-…
HWT 160 M (230 V), 40 – 160 mm -600
HWT 160 M (110 V), 40 – 160 mm -700
HWT 160 M (230 V), 1½” – 6″ -850
HWT 160 M (110 V), 1½” – 6″ -851
HWT 160–M+ (230 V), 32 – 160 mm
w/ wide aluminum master clamps, incl. steel reducers		 -250
HWT 160–M+ (110 V), 32 – 160 mm
w/ wide aluminum master clamps, incl. steel reducers		 -350
HWT 160–M+ (230 V), 1½” – 6″
w/ wide aluminum master clamps, incl. steel reducers		 -550
HWT 160–M+ (110 V), 1½” – 6″
w/ wide aluminum master clamps, incl. steel reducers		 -950
Operating range O.D. 32 / 40 – 160 mm
Materials PE, PP, other thermoplastics
Input voltage 230 V, 50/60 Hz or 110 V, 50 Hz
Rated power 1.8 kW
Transverse table travel 130 mm
Overall dimensions of machine (W x H x D) 730 x 580 x 430 mm
Weight of basic chassis 33 kg
Weight of machine incl. of all reducers in case 62 kg
Overall dimensions incl. stand (W x H x D) 730 x 1200 x 550 mm
Reducers (32) 40, 50, 63, 75, 90, 110, 125, 140 mm | 1½”, 2″, 3″, 4″, 5″, 6″
Accessories Steel transport box for reducers, user’s manual, tools

Related products

HWT 500 CS

Request a Brochure
HÜRNER's HWT 500 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 200 (160) through 500 mm | 6" - 20". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Electrofusion Sanitary Applications

Request a Brochure
HÜRNER’s all-purpose electrofusion welders for heater-coil fittings offer expertly and convenient jointing with PE fittings for electrofusion sized 16 - 315 mm in wastewater and roof draining applications. Controlled by a microcontroller, the next-generation welder HÜRNER HST-S-315 2.0 enables temperature compensation by welding duration and features input and output voltage monitoring. It thereby is the convenient choice for power supply from a generator on a worksite, too. The welding process is monitored for its full duration, and relevant information is displayed on the seven-segment screen. The welder ships equipped with connection adapters A00, A01, A02, A03, A04, and A0P (Waviduo 200 - 315 mm). The delivery also includes a manual scraper for professional pipe preparation before welding. With its compact dimensions and the long power supply and welding cables, the welder has an extremely large working radius and can therefore be used for those pipelines that are hard to reach.

HÜRNER WhiteLine WeldControl 2.0

Request a Brochure
The handling of a WeldControl machine is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3rd clamp for clamping fittings with a short connecting stub.*) *) Retrofit kit for converting existing systems to industry version available upon request!

HÜRNER BSM 450

Request a Brochure
This band saw for cutting plastic pipes offers a working range from O.D. 50 - 450 mm. The machine has a steel pipework frame with a diamond-shaped pipe bed. A variably adjustable clamping system allows the manual securing of the pipe in the diamond bed. An angle gauge located on the side where the user stands enables any cutting angle from 0 deg. through 45 deg. An optional support panel can be mounted onto the diamond-shaped bed to enable you to cut Tees and crosspieces professionally.
Machine dimensions (H x W x D) 1800 x 1400 x 1200 mm Machine weight 190 kg Power supply 400 V, 50 Hz (3 ph. PE, N) Machine overall rated power 1250 W Operating range 50 - 450 mm Manufacturer Warranty 12 months Standards, quality WEEE Reg. No. DE 74849106, ISO 9001:2015

HWT 630 CS

Request a Brochure
HÜRNER's HWT 630 CS  servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 160 through 630 (500) mm | 6" - 24 (20)". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Filter Units with Fan

Read more
This filter with fan provides positive extraction and monitoring of chemical storage cabinets, in the form of almost 100% decontamination of the extracted air by molecular adsorption filtering of harmful solvent vapors (hydrocarbons). The filter operation means optimum protection for the user. As a consequence, no additional air extraction outlet is needed, which, in turn, allows the filter unit to be operated immediately next to, or on top of, the storage cabinet. The decontaminated air is released into the ambient air, thereby not consuming any heated or air-conditioned air from the room. A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the set threshold is detected. The enclosure is made of silver pearl glimmer, powder-coated sheet steel. As an air extraction system, it as of today complies with “green lab” requirements, while offering you full flexibility of position. The multi-stage, grounded filtering system offers dual safety, being composed of: Activated carbon filter with twice as much activated carbon — for up to 100% decontamination Additionally a DIN EN 779-compliant particulate filter The filter alert appliance can be set at the differential pressure meter/switch. The filter elements themselves and the filter enclosure lid are monitored by ATEX-compliant micro-switches. The three-month check and replace interval of the activated carbon filter is verified by a check report the user has to confirm which is paired to a scheduler. The product ships ready for plug-in.

Electrofusion Without Report Logging

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience.

HWT 160 SW–S

Request a Brochure
This professional socket welder for saddle-style fittings is designed for all-purpose welding applications in PP, PP‑R, and PEHD pipeline grids, to make branch‑offs of O.D. 20 - 90 mm from straight pipelines of O.D. 40 - 160 mm. It is the ideal choice for making lines branching off from the pipe in a saddle position in tight corners, but also for workshop applications meant for the serial manufacture by a reliable process of distribution/manifold lines with the help of a movable right-hand and left-hand pipe clamp. The standard delivery includes the all-purpose pipe aligners for straight pipelines sized O.D. 40 - 160 mm, a bracket compatible with various cordless drills/screwdrivers Ø 43 mm driving the drilling head, and clamps for branch-offs in the saddle position sized up to O.D. 63 mm allowing precision alignment of cylindrical and octagonal fittings.

With the HÜRNER quick mounting system, the clamps can be replaced easy as ABC. The chassis/carriage, without the RH and LH pipe‑aligning clamps, can be removed from its steel frame by simply loosening 4 mounting screws and can then be used in areas that are hard to reach or overhead.

Both the operation of the clamps for the straight pipe and the saddle fitting and the movement of the carriage for the latter are implemented as using ergonomically designed handwheels. Additionally, the motion handwheel can be removed easily, to move the clamping chassis/carriage with a common power tool (cordless drill/screwdriver) as its drive.

A special mention deserve the heating element seat next to the chassis for clamping the saddle fitting, on which to place the heating element, and the two freely adjustable depth setpoints. The easy insertion and safe and swift removal of the heating element, including centering and an auto‑detaching step in the change‑over stage, bring a use as convenient as to be considered unique.

The insertion depth setpoints provide, on the one hand, consistent fusion depth and welding position and, on the other, shorter length of movements, thus faster change-over.

Special octagonal clamps for branch‑off fittings, of various wrench sizes, are also available.