HWT 250 MI

HÜRNER HWT 250 MI for manufacturing PE, PE 100 RC, PP, and PVDF¹⁾ pipes, segmented bends, and fittings.

The design of the machine is such that pipes, segments O.D. 50 – 250 mm / 1½”– 8″ with any SDR ratio up to SDR 11 can be processed.

The system was developed under the machinery directive 2006/42/EC as amended, as far as applicable, and is set on a welded and bolted, totally
heavy-duty support frame resistant to warping by design. Both the movable carriage of the system and the console carrying the heating element and the facing tool travel on precision-engineered, heavy load-bearing shafts and trapeze-shaped guides constructed with smoothly travelling runner blocks.

Inserting the PTFE-coated heating element and the facing tool manually is as convenient as it is effortless. The swiveling master clamps on both sides can be rotated by up to 2 x 15 deg. (∢30 deg.) and also feature horizontal adjustability, to allow for compensating any misalignments.

Heating element temperature control and facing tool operation are managed on the front panel. The practical wooden transport case serves both
as a operating platform and as secure storage for the machine, the reducers, and the accessories.

Categories: HÜRNER, Workshop Technology

Description

Description

Technical Specs

Technical Specs	P/N
HWT 250 MI (230 V)	408-000-000
HWT 250 MI (110 V)	408-000-001
Reducer set, aluminium (50 – 225 mm) incl. pipe rests and wooden transport box	408-401-SET
Reducer set, steel (50 – 225 mm) incl. pipe rests and wooden transport box	408-402-SET
Reducer set IPS (1½” – 8″) incl. pipe rests and wooden transport box	408-403-SET
Operating range w/ straight pipe, segments	50 – 250 mm, SDR 11 \| 1½” – 8″ IPS
Materials	PE, PE 100 RC, PP
Input voltage	230 V, 50/60 Hz or 110 V, 50 Hz
Rated power	3.2 kW
Weight inclusive of master clamps	approx. 93 kg
Dimensions (W × H × D)	approx. 880 x 585 x 740 mm (with handle of heating element)
Reducers	50, 63, 75, 90, 110, 125, 140, 160, 180, 200, 225 mm \| 1½”, 2″, 2½”, 3″, 3½”, 4″, 6″, 8″ IPS
Accessories	Wooden transport box for reducers, user’s manual, tools

Related products

HWT 630 CS

Request a Brochure

HÜRNER's HWT 630 CS servo-operated workshop system is the end-to-end transformation of worksite technology into workshop systems. The system has been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allows making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 160 through 630 (500) mm | 6" - 24 (20)". The welding system is set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriage and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. It goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Electrofusion Customized Solutions

Request a Brochure

The WhiteLine welders cover all areas of application in electrofustion welding of PE, PP, and PVDF pipes with heater coil fittings. There is no challenge for which you will not find a welder of the series able to take it on successfully.

Wherever applicable, HÜRNER's all-purpose electrofusion welders have been developed in line with the requirements of the most recent version of the ISO standard 12176-2:2000, the DVS standard 2201-1, and the WEEE directive, with Reg. No. DE 74849106.

Whether it is jointing in the safety-sensitive area of gas networks, including accurate recording of geographic data, jointing components with very small diameters (e. g., geothermal or sanitary fitting applications) or very large diameters (e. g., wastewater applications)—the welders will always make a statement by their unyielding reliability that builds on more than 40 years of developing and manufacturing experience

HÜRNER LI Line CNC ECO

Request a Brochure

The HÜRNER LI Line CNC ECO is a high-quality and durable, next-generation CN-controlled plastic pipe butt-welding machine that has been developed in compliance, as applicable, with the machinery directive 2006/42/EC as amended as well as the ISO standard 12176-1 and the DVS standard 2207-1. The design of the machine is such that with 12 basic machine chassis models, pipes from O.D. (63) 75 through 355 mm can be jointed The welding machines ship with a fully encased CNC hydraulic and control box of ingress protection IP 54 managing pressures of up to 220 bar. Both the anti-stick-coated heating element and the facing tool are hooked up along with the machine chassis to the hydraulic and control unit. No additional power distribution is needed.

HÜRNER WhiteLine WeldControl 2.0

Request a Brochure

The handling of a WeldControl machine is simply unique and it enables an approach to welding no other system is able to offer. Either the operator makes use of the assistance of the interactively responding hydraulic and control unit. Or the manual mode is selected to make the joint “by hand”. In the WeldControl mode the system walks the operator through the process after the pipe parameters were entered or confirmed. This includes monitoring the operator’s inputs and recording the entire process. WeldControl machines do not only provide presets, though; they facilitate the work, e. g., by reducing the pressure automatically when the automode was enabled. Welding reports have all data required by ISO traceability. In the Manual mode the display screen works as a digital gauge. It displays the welding pressures and heating element temperatures and is a one-stop provider of all data. Industry version: Optionally, the machine chassis (250, 315, 355, 500, 630) are also available in an industry set-up with a modified 3^rd clamp for clamping fittings with a short connecting stub.*⁾ *⁾Retrofit kit for converting existing systems to industry version available upon request!

Air Extractor with Fan

Request a Brochure

This extractor provides easy airflow monitoring of chemical storage cabinets. The airflow monitoring unit with integrated fan ships preassembled to be installed immediately on top of the storage cabinet. The enclosure is made of silver pearl glimmer, powder-coated sheet steel

A sensor monitors the extraction airflow and triggers a visual and audible alarm when no airflow above the defined minimum is detected. The air monitoring unit fan ships preassembled to be installed immediately on top of the storage cabinet. The alarm threshold for the airflow velocity is factory-set, but can be customized at the differential pressure meter/switch. The airflow sensor monitors the actual extraction velocity and the entire extraction system of the storage cabinet. Both the volumetric flow and the power supply are sensed by a microcontroller unit. When airflow velocity drops below the set threshold, visual and audible alarms are set off. The system ships with two potential-free (“dry”) contacts (24 V, 2 A) that can be used to send an alarm signal to the control center. An integrated battery cuts in in case of power supply failure, and the monitoring system and the display, including simple error messaging, can run on it for 4 hours. The product ships ready for plug-in.

EasyWeld Line

Request a Brochure

HÜRNER’s EasyWeld Line is your professional solution for butt-welding applications with PE, PP, PVDF¹⁾ and ECTFE¹⁾ pipes and fittings for all pressure ratios, from O.D. 20 through 110 mm (Tees O.D. 20 through 90 mm) and O.D. 50 through 180 mm. This system enables a unique way of handling that is simply unavailable anywhere else. For welding operations, it offers all the advantages of a mobile butt-welding system that is user-friendly and handy enough to be at home at any place, both on worksites and in workshops. The master clamps on the machine chassis are available, in the standard delivery, with horizontal and for the EasyWeld 110 T model also with vertical adjustability, which is particularly important for optimum results in Tee and segmented-bend welding applications. Its compact and lightweight design turns the machines into the optimum choice for overhead welding operations. This requires just the easy step of disassembling the machines from its base panel. The manufacture of fittings is possible thanks to the clamps on the chassis bilaterally swiveling by up to 15 deg. each (∢ 30 deg.). For tee jointing operations using the EasyWeld 110 T model, master clamps for the chassis are available that are set at a 45 deg. angle. The machines as a whole with its frame are mounted on a heavy-duty, powder‑coated base panel. Besides the standard delivery that includes a power facing tool, an outfit with a perfectly ergonomically designed manual facing tool is also available for the EasyWeld 110 V 2 model version. Both the power and the manual facing tools feature a reversible blade. The electronically controlled, PTFE-coated heating element features an integrated temperature control.

HWT 400 Line

Request a Brochure

HÜRNER's HWT 400 Line is the end-to-end transformation of worksite technology into workshop systems. As a consequence, the HÜRNER HWT 400 mm workshop line, too, has systems of the versions CNC (HWT 400 CS and HWT 400 CS-S), WeldControl (HWT 400 WeldControl), and Manual Hydraulic (HWT 400 M). All systems have been developed in compliance with the so-called machinery directive 2006/42/EC as amended and allow making segments, tees, Y pieces and crosspieces in workable dimensions from O.D. 90 through 400 mm (3 - 16" IPS). The HWT 400 CS-S is equipped with additional master clamping assemblies designed for sidewall fusion onto the pipe saddle. The control software has been specifically adapted to allow one-sided preheating of the straight pipeline. The welding systems are set on a welded or a screwed-fast, heavy-duty, no-warp support frame and the bearings on which move both the horizontally traveling carriages and the heating element and facing tool assembly, are designed as precision-engineered and heavy load-bearing trapeze-shaped guides with precision-matched runner blocks. For the product versions CNC and WeldControl, it goes without saying that all parameters that are critical for a high-quality and reproducible welded joint are monitored throughout the process and saved to the memory of the system, which can hold up to 10,000 reports. Furthermore, all CNC and WeldControl systems are equipped with a USB interface to enable downloading the welding reports in the PDF format to a USB stick or sending them to the management database in the HÜRNER DataWork Professional format. It is also possible to label a joint immediately for its quality by printing on plastic foil an indelible label tag with the available tag printer that will identify the fitting.

Fluid Media Management System

This fluid media management system with a programmable control terminal and numerous functional modules ensures highest levels of occupational safety. One control terminal can be used to control several chemical storage cabinets and can be set up with various modules. In its standard model version, the system allows selecting the components needed for a planned system from the following modules: Identification module which makes sure that only authorized persons are given access to the hazardous substances in question. In active storage mode, the media are released only subsequent to proper identification. This is implemented in the form of the input of a programmable PIN. The identification can also be implemented, upon request, with transponder keys or biometrical readers. Air extraction monitoring module which monitors the air extractions and triggers alarms as appropriate. The air extraction has to be always operating on cabinets that can go into active storage mode. When it is, it must constantly verify that there is a flow of extracted air and must alert to the problem whenever the airflow should fail. The air extraction monitoring module is a way to comply with this requirement, i.e. when extraction airflow fails, an alarm is triggered and a signal is sent, e.g., to the control center. Dosing module which enables exact filling. The dosing module turns the release of very small quantities of fluid media from large storage units into a process that it just as easy as it is safe. The ideal add-on to a COMPLEX Line drum station, there is the possibility, besides dosing, to ensure continuous analyses of consumed and remaining quantities. Level sensing module which alerts to the risk of overflowing storage units. The level sensor drastically reduces any risk of bringing too much media into a storage unit, and the safety of both the user and the environment increases accordingly. The level sensing module is the part that completes the perfect solution, DISPOSAL Line. Combining the DISPOSAL Line and the COMPLEX Line brings you the ideal preconditions to ensure easy and safe media management. Door opening module which opens the door when switched on at the keypad. When the command was entered and confirmed, an audible signal alerts the user to the door being opened. The control by compressed air does not have any electrical or electronic component, which makes it perfectly suited for explosive atmospheres. Door locking module which enables pairing door locking and door unlocking to user identification, thereby restricting access to the fluid media to those persons authorized to use them. In other words, access control for personnel can extend to the access to the chemical storage cabinets.